Best Seller
The SD-360U SMT stencil printer is equipped with a holder that has a unique up and down lift system to position the stencil over the prototype PCB. The stencils do not need mounting holes and fixing a stencil is fast and easy.
$2,695.00
Delivered to your door
Best Seller
- 4 Heads
- 50 Electric Feeders
- 6 Cameras
- Precision Servo Mechanism
$9,995.00
Best Seller
The Gold-Print™ SPR-45 automatic SMT stencil printer, similar to the SPR-40, is more automated with its power sweep squeegee and power frame lift for higher volume runs. For fine pitch applications the friendly precision controls make PCB assembly operation simple and easy.
$9,620.00
Best Seller
This automatic printer H4E with automatic vision recognition function using high-precision Servo drive system to achieve fast and accurate alignment, that can reach +/0.01mm of precision.
$30,000.00
Delivered to your door
Best Seller
The LS40V is our most popular model with Vision. The LS40V offers technologically advanced features with a 13" x 22" (330mm x 559mm) work area, 56 single feeder positions (up to 84 feeders using bank feeders) where quick setup, ease of operation and high reliability are paramount.
$37,500.00
Best Seller
The Gold-Place™ MPP-21 pick & place machine allows an operator to accurately and efficiently place SMT components manually on the printed circuit board.
Its patented hand rest and arm assembly alleviates operator fatigue by carrying the operator's hand throughout the entire process.
The vacuum tip automatically toggles on and off during component pick-up and placement.
The digitally timed dispenser accurately deposits solder paste, adhesives and various potting compounds.
The MPP-21 comes with the four mode programmable dispenser.
The MPP-21 comes with the four mode programmable dispenser.
$4,500.00
Best Seller
The GF-12HT SMT Reflow Oven uses a patented Horizontal Convection™ technology that circulates heated air in each chamber around the printed circuit board front to back which increases the thermal efficiency and uniformity within each zone. This exposes the circuit boards to a uniform temperature profile along the entire SMT PCB assembly. Cyclonic generator speed is independently set in each zone.
$8,995.00
Best Seller
The Gold-Flow™ GF-B-HT Shuttle Batch oven was designed for prototyping printed circuit board assembly and batch production runs. Capable for lead or lead-free soldering.
While one PCB is being processed, another circuit board can be cooled and off-loaded, then a third board can be loaded and shuttled into the chamber for reflow
$4,950.00
Best Seller
The Mistral 360 convection reflow soldering system uses re-circulated hot air to accomplish reflow at much lower temperatures than IR systems.
Using constant, even heating, a great variety of board sizes will reach reflow temperature with the same heat profile.
By eliminating set-up time your production line can work to its fullest capacity.
$15,906.00
Best Seller
Touchscreen controlled Lead-free wave solder with titanium finger conveyor/stepper controlled spray fluxer. One hot air preheating zone and pure titanium solder pot
$26,000.00
Delivered to your door
Best Seller
If you are searching for the maximum level of automation and performance in a single heavy duty wave soldering machine, then this is the machine for you.
Shipping Cost Is Included
Shipping Cost Is Included
$50,000.00
Delivered to your door
Best Seller
This IBot-1 Soldering robot comes with a single PCB station that can move in Y direction, with tip that can move in X, Y, Z, R, directions, soldering wire feeding with motion system, and a 250W heating system that has a rapid temperature recovery time.
$22,500.00
Best Seller
HBS-A4T Hot Bar Soldering Machine use thermode technology that based on rapid reflow by pulse heating to effectively solder flexible board on the PCB. Real time display on the touch screen. Can option CCD+displayer can accurate positioning and soldering quality check. The Z axis is controlled by a stepper motor and can be preset to soldering pressure.
$5,000.00
Best Seller
This AR-450 is equipment with high speed spindles, 42000 RPM will be able to cut PCBs made of FR4, fiber glass, Al, and can ensure <0.05mm routing accuracy.
$18,700.00
Best Seller
The GR300S is an automated desktop type dispensing robot with a variety of dispensing valve and material feeding system to meet different material dispensing requirement
$5,950.00
Best Seller
- 4 Heads
- 64 Electric Feeders
- 6 Cameras
- Precision Servo Mechanism
$24,995.00