Request for Quote

* Required Fields


Frameless UltraSlic™ Stencils

LEAD TIME: 48-Hour Turn    |     PRICE : $350.00

UltraSlic™ Frameless Stencils provide superior aperture registration, higher performance and lower cost compared to electroform, the option of step stencils, and the option of 48 hour turnaround times.
  • Paste release performance comparable to electroform technology
  • Lower standard deviations, higher repeatability and cleaner release of solder paste
  • Reduces storage space requirements
  • Significantly less expensive than UltraSlic™ Framed Stencils

Part Number: *
Date Needed: *
Stencil File(s): 
Stencil Side: *
Stencil Thickness: *
Approx. Stencil Size: *

(e.g. 20"x20", 22"x22", Best Fit)
Are you using a SMT Stencil Printer? *
Frame Type: *

(e.g. QTS, ZelFlex, N/A)
Printer Name: *

(e.g. SPR-25, Custom, N/A)
Lead Free Application? *
Fiducial Data: *
Is circuit board panelized? *
Send me a Check Plot? *

Special Instructions:

The Stencils Unlimited way - Prototype SMT Stencils. Click to zoom The UltraSlic™ high performance stencil technology has become the preferred choice when printing assemblies with challenging miniature components. The addition of a permanent, hydrophobic nano-coating to the UltraSlic™ stencil foil minimizes the ability of solder paste to stick to the stencil apertures and the bottom side of the foil. With the new nano-coating, up to a 10X increase in the number of prints before cleaning the stencil is possible, as well as successful printing at surface area ratios below 0.45.

The UltraSlic™ Stencil is the first laser-cut, solder paste stencil that has paste release performance comparable to electroform technology, yet can be cut and shipped the same day the order is placed. UltraSlic™ Stencils incorporate the latest advancements in stencil laser technology along with a new, cutting-edge Fine Grain stencil material from Datum Alloys.

UltraSlic™ Stencils have lower standard deviations, higher repeatability and cleaner release of solder paste compared to other stencil technologies. A more consistent solder paste deposition, as well as a reduction in stencil cleaning frequency and rework results in higher yields and tremendous throughput improvements.

Finer Printing
For solder paste you will see improved print quality and release and especially with paste types 6, 7 and 8 where PSD can be as low as 1 or 2 microns.

Super Smooth
Super smooth surface technology, coupled with our unique wetcoat treatment results in a stencil substrate that will out-print any material on the market.

UltraSlic™ Stencils are laser cut solder paste stencil foils permanently mounted in a stencil frame using a mesh border to tightly stretch the stencil foil taut in the frame.