Component Stencils are laser cut stencils typically used to manually print a single component on a printed circuit board.
They are bent on 2 sides, creating two side flaps for the purpose of holding the stencil between the thumb and finger.
A squeegee blade is included.
These solder paste stencils are custom-made for any component and can be customized with relief areas, to eliminate removing neighboring components.
Prototype Stencils are laser cut stencils custom-made for your own printed circuit boards using your Gerber or CAD files.
These frameless solder paste stencils were specially designed for manual printing.
They comes with a squeegee blade and board holders.
Our Prototype Stencils & Toaster Reflow Oven process will make your PCB prototype assembly job easier and save you time.
We are backing that with a money-back guarantee program.
Prototype foils are laser cut stencils custom-made for your own printed circuit boards using your Gerber or CAD files.
These frameless solder paste stencils were specially designed for manual printing.
They comes with a squeegee blade and board holders. Our Prototype Foils & Toaster Reflow Oven process will make your PCB prototype assembly job easier and save you time.
We are backing that with a money-back guarantee program.
Frameless Stencils are laser cut stencils designed to work with stencil tensioning systems also known as Reusable Stencil Frames.
These solder paste stencils do not need to be permanently glued in a frame. Frameless Stencils are significant less expensive than Framed Stencils and reduce storage space requirements.
Frameless Stencils are designed for screen printing on printed circuit boards.
Our Frameless Stencils provide optimum solder paste volume control.
They have smooth aperture walls and can be used for 16 Mil pitch and below and for Micro BGA's.
Framed Stencils or glue-in stencils are laser cut stencil foils permanently mounted in a stencil frame using a mesh border to tightly stretch the stencil foil taut in the frame.
These solder paste stencils are designed for high volume screen printing on printed circuit boards.
Our framed stencils provide optimum solder paste volume control.
Framed stencils have smooth aperture walls and can be used for 16 Mil pitch and below and for Micro BGA"s.
We fabricate Framed SMT stencils for a variety of stencil printers.
